End of Line Offers
Part No: 60.202
- 2000mm long
- 180° rotation
- 275 Bar max pressure
- 120°C max temperature
- Galvanized finish
- 8.6Kg
Part No: LC3500IO-110V
- 3.0kW rated output
- 110V, 50Hz rated voltage
- Loncin 5.5Hp petrol engine
- Recoil start
- 2x 110V 16 Amp outlets
- 9 hours running time
Part No: EH1413MV
- 140 Bar
- 13 Lpm
- 2800 Rpm
- 4.8 Hp, 3.52 kW
- 24mm male shaft
- Brass manifold, integrated valve
Part No: R4525-743A
- 2.1 Bar switch setting
- 17 Lpm max flow
- 12/24 Volt DC, 12/6 Amps
- Pressure sensor controlled variable speed motor
- Speeds up as demand increases
- Self-priming, up to 2.4m
Part No: WW1513I
- 150 Bar
- 13 Lpm
- 2800 Rpm
- 5.0 Hp, 3.67 kW
- 5/8" hollow parallel key shaft
- Forged brass manifold
Part No: 603-1105
- 0.075 Litre volume
- Set to 42 Bar (Can be set to order)
- 250 Bar max pressure
- 8:1 P max/Po
- 210 Bar P max-P min
- -10° to 80°C working temperature
Part No: 9901-202CAP
- 2" coupling
- 2" blanking cap
- Glass reinforced polypropylene
- Plastic arms
- EPDM gasket
- 1.38 Bar (20psi) max pressure
Part No: 9917-2518S
- 110/115 Volt - 50/60Hz
- 1200W
- Copper windings
- Supplied with cables
- For 700-1174 vacuum
- END OF LINE SPECIAL NET PRICE
Part No: HY1803C
- 69 Bar water pressure
- 11 Lpm water flow
- 90 Bar oil pressure
- 19 Lpm oil flow
- Forged brass manifold
- Return to feed unloader valve
Part No: 6049010300
- 10 Bar
- 6.7 Lpm
- 1450 Rpm
- 0.25 Hp, 0.18 kW
- For 63 frame B3/B14 electric motor
- NBR diaphragms - Nylon body
Part No: SV12
- 640-1800 Bar pressure
- 12-100 Lpm flow
- 30°C max water temperature
- Stainless steel construction
- Factory set & sealed to order
- 1/2"BSPM inlet
Part No: F2H-55-Y
- 1"1/2 polypropylene ball valve
- 12 Volt DC EH2 On/Off 1.5sec
- 10 Bar max pressure @ 21°C
- Stainless steel ball & stem
- Viton O rings - Teflon seals
- Sealed motor head