Pratissoli Industrial Pumps

<< PLUNGER PUMPS

<< PRODUCTS

Shipyards: cleaning of hulls, anchors, condensers, underwater cleaning.
Steel industry: descaling, cleaning blast furnace cooling systems.
Mining: dust control, filter & machine cleaning, conveyers.
Beverage industry: cleaning of casks, tanks, pipes, fermentation tanks.
Chemical industry: cleaning of autoclaves, heat exchangers.
Paper industry: dust suppression, cleaning of evaporators, mixers.
Municipal services: waste incineration plants, sewer jetting, buildings
Cement industry: cleaning & cutting of concrete, kiln cleaning.

Direct or belt & pulley drive
Ceramic coated stainless plungers
Unitised stainless steel valves
Pressures up to 1000 Bar
Flow rates up to 423 Lpm
Cast iron oil bath crankcase
Manifolds in cast iron, stainless steel brass or aluminium bronze.

Important - When using with temperatures over 40°C contact us for installation & operating instructions

KE Series Triplex		KF Series Triplex

	Flow rates up to 70 Lpm Pressures up to 300 Bar 1" BSP female inlet ports 1/2" BSP female outlet ports Nickel plated s/steel manifold Maximum fluid temp 60°C*		Flow rates up to 170 Lpm Pressures up to 210 Bar 1 1/2" BSP female inlet ports 1" BSP female outlet ports Nickel plated s/steel manifold Maximum fluid temp 60°C*
	<< Back to New Products		<< Back to New Products

HF Series Triplex		VH Series Triplex
			Flow rates up to 23 Lpm Pressures up to 1000 Bar Stainless steel manifold Maximum fluid temp 30°C
	Flow rates up to 74 Lpm Pressures up to 600 Bar 1" BSP female inlet ports 3/4" BSP female outlet ports Nickel plated s/steel manifold Maximum fluid temp 60°C*
	<< Back to New Products

MS Series Triplex		MH Series Triplex
	Flow rates up to 314 Lpm Pressures up to 300 Bar Nickel treated cast iron manifolds Maximum fluid temp 60°C		Flow rates up to 405 Lpm Pressures up to 300 Bar Nickel treated cast iron manifolds Maximum fluid temp 60°C

LH Series Triplex
	Flow rates up to 423 Lpm Pressures up to 300 Bar Nickel treated cast iron manifolds Maximum fluid temp 60°C
		Important - this pump must be operated with an inlet pressure of 5 to 10 Bar & water filtration of 10 to 20 microns. Do not attempt installation prior to consulting the sales office with full system specifications.

<< PLUNGER PUMPS

<< PRODUCTS

Dual Pumps Limited, 47 Norman Way, Melton Mowbray, Leicestershire LE13 1JE
Tel: +44 (0)1664 567226 Fax: +44 (0)1664 410127
©Copyright Dual Pumps 2007 All Rights Reserved. Dual Pumps Disclaimer Company Reg. No. 1216746
Website hosted by: www.millennium.ltd.uk