Hydraulic Driven Pumps

<< CENTRIFUGAL PUMPS << PRODUCTS
  • Agricultural crop sprayers
  • Water & chemical transfer
  • Dust suppression systems
  • Dewatering & irrigation
  • Max flow rates up to 1060 Lpm
  • Max pressures up to 10.6 Bar
  • Choice of non & self-priming
  • Certain pumps are also suitable for acids & corrosive chemicals - contact sales office for details.
  • All data & performances are based on water at a temp of 20°C.
  • Priming capability will vary depending on pump type, speed & suction conditions.
  • All performances are based on specific factory test conditions & may vary under different applications.

Hydraulic Motor Driven
Non Self-Priming - Cast Iron

Hydraulic Motor Driven
Non Self-Priming - Polypropylene

Hydraulic Motor Driven - Non Self-Priming - Cast Iron
  • Flow rates up to 790 Lpm
  • Pressures up to 8.9 Bar
  • Carbon & ceramic mechanical seal
  • Viton seals & o-rings
  • Glass filled nylon impeller
  • Stainless pump wear ring
Hydraulic Motor Driven - Non Self-Priming - Polypropylene
  • Flow rates up to 310 Lpm
  • Pressures up to 5.8 Bar
  • Carbon & ceramic mechanical seal
  • Viton seals & o-rings
  • Glass filled polypropylene impeller
  • Stainless pump wear ring

Hydraulic Motor Driven
Non Self-Priming

Hydraulic Motor Driven
Self-Priming - Cast Iron

Hydraulic Motor Driven Non Self-Priming
  • Flow rates up to 435 Lpm
  • Pressures up to 8.9 Bar
  • Carbon & ceramic mechanical seal
  • Viton seals & o-rings
  • Glass filled polypropylene impeller
  • Manufactured in 316 S/Steel
Hydraulic Motor Driven Self-Priming - Cat Iron
  • Flow rates up to 673 Lpm
  • Pressures up to 10.6 Bar
  • Carbon & ceramic mechanical seal
  • Viton seals & o-rings
  • Glass filled nylon impeller
  • Stainless pump wear ring

Hydraulic Motor Driven
Self-Priming - Polyester

Hydraulic Motor Driven
Self-Priming - Polypropylene

Hydraulic Motor Driven Self-Priming - Polyester
  • Flow rates up to 1060 Lpm
  • Pressures up to 3.7 Bar
  • Carbon & ceramic mechanical seal
  • EPDM seals & o-rings
  • Stainless steel fasteners
  • Glass reinforced polyester
Hydraulic Motor Driven Self-Priming - Polypropylene
  • Flow rates up to 900 Lpm
  • Pressures up to 2.3 Bar
  • Carbon & ceramic mechanical seal
  • Viton seals & o-rings
  • Stainless steel fasteners
  • Glass reinforced polypropylene
<< CENTRIFUGAL PUMPS << PRODUCTS
Back Up

Dual Pumps wholesaler of fluid handling components, pumps, pressure wash accessories and cleaning equipment

Dual Pumps Limited, 47 Norman Way, Melton Mowbray, Leicestershire LE13 1JE
Tel: +44 (0)1664 567226 Fax: +44 (0)1664 410127
©Copyright Dual Pumps 2007 All Rights Reserved. Dual Pumps Disclaimer Company Reg. No. 1216746
Website hosted by: www.millennium.ltd.uk

Dual Pumps wholesaler of fluid handling components, pumps, pressure wash accessories and cleaning equipment

Gum Blaster Video Clip Whirl-A-Way Video Clip