- Agricultural crop sprayers
- Water & chemical transfer
- Dust suppression systems
- Dewatering & irrigation
|
- Max flow rates up to 2300 Lpm
- Max pressures up to 2.5 Bar
- Choice of non & self-priming
|
Certain pumps are also suitable for acids & corrosive chemicals - contact sales office for details. All data & performances
are based on water at a temp of 20°C. Priming capability will vary depending on pump type, speed & suction conditions.
All performances are based on specific factory test conditions & may vary under different applications. |
|
Electric Motor Driven
Self-Priming - Polyester |
Electric Motor Driven
Self-Priming - Polypropylene |
|
- Flow rates up to 880 Lpm
- Pressures up to 2.5 Bar
- Carbon & ceramic mechanical seal
- EPDM seals & o-rings
- Stainless steel fasteners
- Glass reinforced polyester
|
|
- Flow rates up to 756 Lpm
- Pressures up to 1.5 Bar
- Carbon & ceramic mechanical seal
- Viton seals & o-rings
- Stainless steel fasteners
- Glass reinforced polypropylene
|
Electric Motor Driven
Self-Priming - Cast Iron |
Electric Motor Driven
Self-Priming - Stainless Steel |
|
- Flow rates up to 100 Lpm
- Max heads up to 60 metres
- Nitrile seals & noryl impeller
- Carbon & ceramic mechanical seal
|
|
 |
- Flow rates up to 70 Lpm
- Max heads up to 55 metres
- Nitrile seals & noryl impeller
- Carbon & ceramic mechanical seal
|
| |
|
|
<< Back to New Products |
Electric Motor Driven
Self-Priming - Stainless Steel |
Electric Motor Driven
Booster Pump - Stainless Steel |
|
|
|
- Flow rates up to 70 Lpm
- Max heads up to 55 metres
- Nitrile seals & noryl impeller
- Carbon & ceramic mechanical seal
|
- Flow rates up to 70 Lpm
- Max heads up to 55 metres
- Nitrile seals & noryl impeller
- Carbon & ceramic mechanical seal
|
| |
<< Back to New Products |
|
|
Electric Motor Driven
Non Self-Priming - Cast Iron |
Electric Motor Driven
Non Self-Priming - Cast Iron |
|
- Flow rates up to 52 Lpm
- Max heads up to 67 metres
- Nitrile seals & stamped brass impeller
- Carbon & ceramic mechanical seal
|
|
- Flow rates up to 110 Lpm
- Max head up to 34 metres
- Nitrile seals & noryl impeller
- Carbon & ceramic mechanical seal
|
|
|
|
